Ghost Immobiliser Fitting
Guard your vehicle against key theft, cloning and hacking using the first aftermarket CAN-Immobiliser. The Ghost app and GPS tracking can be connected to the immobiliser, which will send you notifications when your vehicle is stolen or tampered with.
The installation of a Ghost immobiliser can be done by a certified technician. It is important to have the right tools and heat shrink tubing.
Getting Started
Contrary to physical theft protection devices such as wheel locks or car alarms, ghost immobilisers protect your vehicle without the need for LED indications or key fobs. Instead they connect directly to the ECU's CAN data network. They can only be activated after entering a PIN code sequence. This provides a much more secure level of security against key hacking, cloning, and even ECU swapping.
Installing a ghost immobiliser Birmingham requires a certain amount of agility and precision. It's like walking through a minefield. A mistake could result in serious damage to your vehicle's electrical circuits. It is crucial to know the procedure for installing and prepare your vehicle properly.
It is necessary to remove interior panels from the vehicle to make room for the immobiliser. Once you've located the perfect location to hide it put it in place by using cable ties to stop it from being removed or damaged. Then, tidy up your wiring by making sure that loose wires are tied down and using insulation tape to cover exposed connections. This can help minimize the risk of accidental short circuits as well as improving the aesthetics and decreasing the chance of tampering from thieves.
Then, locate the source of constant 12V power and a grounding point for the ghost immobiliser. Once you've identified these, test the power wires using a multimeter to ensure they are delivering a consistent voltage. Connect the CAN H & the CAN L wires of your immobiliser to the power source and grounding points.
It is essential to ensure that all connections are checked and examine the immobiliser to check for signs of corrosion. Also, test the system to make sure it's functioning properly by entering a pin code and then starting the engine. This should be a regular part of your routine because it will allow you to detect any issues that might be intermittent early. Regular testing can help increase the longevity of your device and keep it functioning at its peak.
Preparing your vehicle
Installing a Ghost immobiliser requires expertise and tools. A wiring diagram is necessary to identify the right wires, establishing precise connections, and ensuring safety. A multimeter is a tool to test electrical values and ensure security. Insulation tape and cable ties can be used to shield connections from being tampered with and to ensure they are secured. Finally, a user manual will provide specific guidance specifically tailored to your Ghost Immobiliser model.
Once installed, a ghost immobiliser can prevent unauthorised engine start by requiring the owner to input a unique PIN code sequence using buttons on the steering wheel or center console. The code can be changed at anytime by the vehicle owner, either manually or remotely using an app for mobile devices. The device is also quiet and is undetectable by thieves since it doesn't emit radio frequencies.
A ghost immobiliser connects directly to the vehicle's CAN bus. It is a network that communicates with all the electronic control units (ECUs). It intercepts the signals sent by ECUs, and blocks the engine if a false one is identified. The system is weatherproof and tamperproof. It has no LED indicators or keys to draw thieves' attention.
It can be mounted behind or in a less noticeable area so that it's not visible to thieves, and won't hinder vehicle's performance. It can even be mounted in a small box, making it less likely to be discovered during a test drive by unscrupulous car salespeople.
Its sly operation, coupled with its integration into the vehicle's CAN-bus system is an effective deterrent to vehicle theft techniques such as signal relay attacks and key copying. The system can be combined with other security measures to create an effective barrier that can thwart even the most obstinate thieves. More and more insurance companies suggest or require ghost immobilisers because they can reduce the cost of insurance.
Making the Connections
Ghost immobilisers are silent unlike traditional security systems, which can be heard by thieves. They prevent them from knowing that your vehicle is on. They also stop the high-tech methods used to steal vehicles, like OBD port hacking. Installing them without leaving permanent marks on your vehicle is a great option for those who intend to sell the vehicle in the near-future.
The Autowatch Ghost 2 CANbus immobiliser is among the newest and most reliable methods for preventing car theft. It makes use of the CAN data network to shut down your engine and generates a PIN code that only you know, which means it's hard for thieves to detect. It can be installed in various vehicles and integrates with a number of features already in place, such as car alarms GPS trackers, car alarms and steering wheel locks and door bypass systems for locks.
If you decide to opt for a Ghost immobiliser, be sure to refer to the wiring diagram for your particular vehicle model to identify the wires that need connecting. Make sure to double-check the location of these wires to ensure that they are in the correct location and mark them with labels or tape to help you keep the track of them. You will also need to find a source of constant power (12V) and a grounding point for the system. Once these are in place, you can start to make the connections needed to complete the installation.
The ghost immobiliser will not allow your vehicle to start unless you enter a pin code via the buttons on the dashboard or steering wheel. This will stop ECU replication and other methods of vehicle theft. In addition, it can be paired with other approved by Thatcham security equipment, such as alarms and tyre clamps to provide your vehicle with an additional degree of security.
As the UK automotive aftermarket industry grows and expand, so do the options for securing your vehicle. With so many options for thieves to get in and steal your vehicle, it's vital to do all you can to ensure it isn't stolen. Ghost immobilisers have become an increasingly popular option for car owners who are accountable.
Testing the System
The Ghost Immobiliser communicates with the vehicle's ECU via an CAN network. This prevents the engine from being started until the PIN code is entered. This makes it very difficult for thieves to copy your key fob and then start your vehicle, and more difficult to disable the system by hacking into its electronics.
Ghost Immobilisers are also able to be used in conjunction with GPS tracking devices that can help you track your vehicle and locate it in the event of theft. This is a feature that isn't often found in security products that are sold aftermarket however it's an excellent option to boost the security of your vehicle and give you peace of peace of.
The Ghost-II immobiliser is not just a source of greater security, but also a pleasant experience for the user by not having to use additional key fobs or devices. It features a simple, easy PIN code entry system that works seamlessly into your daily routine. In addition, it offers options for deactivation and features that allow you to temporarily disable the immobiliser valet parking or for servicing.
Prepare immobiliser ghost and familiarise yourself first with the wiring of your vehicle. A basic set will allow you to make precise connections. A multimeter is a tool to test electrical values. Insulation tape and heat-shrink tubing is essential to shield connections from short circuits. Cable ties can also be used to secure wiring. Additionally, it is essential to work in a well-lit area and wear safety gear when working with tools and electrical components.
After you've completed the installation, you should test the Ghost immobiliser to make sure that it's functioning properly. First, you need to try to start the vehicle without entering the PIN code. If this fails, you'll need to retest the system and conduct a thorough inspection of the connections.
The Ghost Immobiliser, unlike other security systems, is a hidden device which cannot be recognized by thieves. It is also more effective than physical deterrents such as wheel clamps and steering locks. It is TASSA approved and recognised by some insurance companies, making it an investment that's cost-effective and will give you peace of mind you need.